Renovo Vinyl Soft Top Cleaner

Application Instructions

Please note: It is advisable to test on an inconspicuous area first, to ensure vinyl is colourfast dyed. Never use a pressure washer on your soft top.

This product is not suitable for use on fabric soft tops.

Normal Cleaning

  1. Dry brush the soft top to remove any residual dirt.
  2. Shake bottle well prior to removing top.
  3. Pour into suitable container.
  4. Apply with a clean 5cm/2" paint brush using even brush strokes. Start at the centre of the cover working out towards the edge.
  5. Leave for 10-20 minutes to ensure the cleaner can work on difficult grime and stains.
  6. Commence scrubbing using warm water and a sponge, cloth or bristle brush until the cleaner begins to lather and dirt is being removed easily. Finish by rinsing off with water. Repeat the whole process if necessary.

For heavily-soiled surfaces leave the solution to dry for approximately 30 to 40 minutes- the optimum time for active ingredients to work. Heavily-soiled surfaces should be scrubbed with a bristle brush. Finish by rinsing off with water. Repeat the whole process if necessary.

Finally leave to dry before applying Renovo’s Vinyl Ultra Proofer.  This marvellous formulation not only protects and conditions against stains and oxidation it also contains a UV inhibitor.

Bird Droppings / Difficult Stains

Dab or pour the Cleaner directly onto the spot of dirt or stain. (Massage into the affected area) Clean off after 30 mins. Repeat process if necessary.

Light Soiling / Quick Cleaning

For less soiled tops cleaning can commence immediately. Pour directly onto on to a cloth or sponge and massage into the affected area. Rinse off with water.

As with all cleaning products, it is best to avoid prolonged contact with skin. It is advised to use rubber gloves for protection.

We advise that you now protect your convertible top from the elements by applying a protective coating of Vinyl Ultra Proofer.


Car Brands
Convertible Car

Renovo Marine