Do’s and Don’ts

Soft Top Canvas Cleaner

Do

Test on an inconspicuous area to ensure fabric is colourfast dyed.

Spray mist the soft-top with water prior to application.

Use a clean paint brush to apply.

Leave Soft Top Canvas Cleaner on for 10-20 minutes for general cleaning.

Leave Soft Top Canvas Cleaner on for 40-60 minutes for stubborn dirt and to remove any previous waterproofing treatments.

Wear protective gloves whilst applying.

Use every 6-12 months.

Don’t

Use a power jet wash to clean a fabric soft top

Use a detergent based cleaner

Apply in direct sunlight.

Forget to shake the bottle prior to use.

Soft Top Reviver

Do

Ensure that the soft top is thoroughly cleaned.

Ensure that you have sufficient Reviver to complete a full coat.

Be diligent in removing previous waterproof coatings prior to application of Reviver.

Keep a soft damp cloth ready to wipe off any splashes or dribbles on paintwork and glass.

Work in a timely fashion to ensure that the edges of the freshly applied Reviver do not dry out too quickly.

Work from the centre outwards round and round the vehicle.

Apply to a dry top and allow Reviver to dry completely before applying further product or taking out in the rain.

Don’t

Forget to shake the bottle prior to use.

Dilute or mix the Reviver with any other product.

Apply the Reviver in direct sunlight or on a hot day that will cause the Reviver to dry too quickly.

Allow to dry on glass and paintwork.

Apply to a soft top that has been coated with a waterproofing agent without removing the proofer first.

Apply to vinyl soft tops or cars with modified paintwork.

Ultra Proofer

Do

Ensure that the soft top is thoroughly cleaned.

Ensure that you have sufficient Ultra Proofer to complete a full coat.

Keep a soft damp cloth ready to wipe off any splashes or dribbles on paintwork and glass.

Work in a timely fashion to ensure that the edges of the freshly applied Ultra Proofer do not dry out too quickly.

Work from the centre outwards round and round the vehicle.

Apply to a dry top and allow Ultra Proofer to dry completely before applying further product or taking out in the rain.

Use every 6-12 months.

Don’t

Use on vinyl soft tops.

Forget to stir the Ultra Proofer prior to use.

Dilute or mix the Ultra Proofer with any other product.

Apply the Ultra Proofer in direct sunlight or on a hot day that will cause the Ultra Proofer to dry too quickly.

Allow to dry on glass and paintwork.

Apply to vinyl soft tops or cars with modified paintwork.

Apply water proofing agent prior to using Reviver unless the proofer is completely removed first.

Plastic Window Polish

Do

Apply with a clean soft polishing cloth.

Use small quantities of Plastic Window Polish working with circular motions in small areas a little at a time.

Allow Plastic Window Polish to dry then with a clean soft cloth polish off using circular movements.

Apply to both interior and exterior of window.

Don’t

Forget to shake the bottle thoroughly prior to use.

Allow the Plastic Window Polish to come into contact with materials or the fabric that surrounds the window.

Soft Top Vinyl Cleaner

Do

Test on an inconspicuous area to ensure vinyl is colourfast dyed.

Use a clean paint brush or sponge to apply.

Leave Vinyl Cleaner on for 10-20 minutes for general cleaning.

Leave Vinyl Cleaner on for 40-60 minutes for stubborn dirt.

Wear protective gloves whilst applying.

Allow to dry before applying Vinyl Ultra Proofer.

Use every 6-12 months.

Don’t

Use on fabric soft tops.

Use a power jet wash to clean a fabric soft-top

Apply in direct sunlight.

Forget to shake the bottle prior to use.

Soft Top Vinyl Ultra Proofer

Do

Ensure that the soft top is thoroughly cleaned.

Ensure that you have sufficient Vinyl Ultra Proofer to complete a full coat.

Keep a soft damp cloth ready to wipe off any splashes or dribbles on paintwork and glass.

Work in a timely fashion to ensure that the edges of the freshly applied Vinyl Ultra Proofer do not dry out too quickly.

Work from the centre outwards round and round the vehicle.

Apply to a dry top and allow Vinyl Ultra Proofer to dry completely before applying further product or taking out in the rain.

Use every 6-12 months.

Don’t

Use on fabric soft tops.

Forget to shake the Vinyl Ultra Proofer bottle prior to use.

Dilute or mix the Vinyl Ultra Proofer with any other product.

Apply the Vinyl Ultra Proofer in direct sunlight or on a hot day that will cause the Vinyl Ultra Proofer to dry too quickly.

Allow to dry on glass and paintwork.

Apply to fabric soft tops or cars with modified paintwork.